PROBILT™ HOT MELT THREE MODULE DISPENSING GUN HEADS
The ProBilt™ Series hot melt glue guns are available in a variety of styles for adhesive dispensing. These three module automatic glue guns have been designed to handle a wide range of low, medium, or high speed hot melt applications. State of the art engineering ensures superior durability, extended service life, and uncompromising performance to meet the operational demands of today’s manufacturing.
All applicator gun heads are an air-open, spring-close operation that when coupled with a performance matched solenoid, can deliver speeds of over 3000 cycles per minute. A factory-set piston stroke and unique seat design provides a consistent glue pattern and precise cutoff, eliminating the need for operator adjustment.
H203T CLASSIC
H203T REDUCED CAVITY
H203T ZERO CAVITY
Benefits:
- All guns are equipped with electrical “quick” disconnects for a fast plug and run installation.
- The use of RTD sensors for precise temperature control.
- A slim profile that allows for greater installation flexibility.
- High strength aluminum manifolds and stainless-steel covers for easy cleaning and unequaled durability.
- Larger diameter heater for extended service life.
Specifications:
Maximum Operating Temperature: 450 °F (232 °C)
Operating Air Pressure: 45 – 80 psi (3.1 – 5.5 bar)
Electrical Specifications: 240 VAC, 50/60 Hz
Maximum Working Hydraulic Pressure: 1500 psi (103 bar)
Operating Speed: Exceeds 3000 cycles per minute
Sensor: 120 ohm Nickel
H203T Applicator Gun Head .88 Inch Centers – H200 Module (AO/SC)
STANDARD ITEM# 39301
WASHDOWN ITEM# 39332
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 714867
H203T Applicator Gun Head .88 Inch Centers – Reduced Cavity Module .008 (AO/SC)
STANDARD ITEM# 39307
WASHDOWN ITEM# 39333
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 126400
H203T Applicator Gun Head .88 Inch Centers – Reduced Cavity Module .012 (AO/SC)
STANDARD ITEM# 39308
WASHDOWN ITEM# 39334
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 126401
H203T Applicator Gun Head .88 Inch Centers – Reduced Cavity Module .016 (AO/SC)
STANDARD ITEM# 39309
WASHDOWN ITEM# 39335
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 126402
H203T Applicator Gun Head .88 Inch Centers – Reduced Cavity Module .020 (AO/SC)
STANDARD ITEM# 39310
WASHDOWN ITEM# 39336
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 126403
H203T Applicator Gun Head .88 Inch Centers – Zero Cavity Module .008 Micro Adjust (AO/SC)
STANDARD ITEM# 39319
WASHDOWN ITEM# 39337
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 130446
H203T Applicator Gun Head .88 Inch Centers – Zero Cavity Module .012 Micro Adjust (AO/SC)
STANDARD ITEM# 39320
WASHDOWN ITEM# 39338
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 715550
H203T Applicator Gun Head .88 Inch Centers – Zero Cavity Module .016 Micro Adjust (AO/SC)
STANDARD ITEM# 39321
WASHDOWN ITEM# 39339
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 809848
H203T Applicator Gun Head .88 Inch Centers – Zero Cavity Module .020 Micro Adjust (AO/SC)
STANDARD ITEM# 39322
WASHDOWN ITEM# 39340
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 136256
H203T Applicator Gun Head .88 Inch Centers – Zero Cavity Module .012 Case Sealer (AO/SC)
STANDARD ITEM# 39328
WASHDOWN ITEM# 39341
240V, 120 OHM NICKEL RTD SENSOR, COMMON AIR
OEM Cross Reference: 114192
H203T Manifold Assembly .88 inch CTRS (Modules Not Included)
STANDARD ITEM# 39949MA
203 PROBILT SERIES MANIFOLD ASSEMBLY, .88 INCH CENTERS
OEM Cross Reference: Universal Systems SE Exclusive