Finding the right melter for your packaging line can impact not only your productivity, but also your bottom line. Most commonly, maintenance managers and buyers simply replace the current OEM melter with the latest model. That is not always necessary. Universal Systems SE ProBilt™ melters have the same footprint as most all Nordson® systems and can easily fit into where the original tank is positioned. Just because your current packaging line has a Nordson® melter does not mean you have to replace it with another expensive Nordson®. Plus, all of our ProBilt™ melters are in stock and can ship same day!
There are several key points to take into consideration when choosing a hot melt system for your packaging line. The most important are: Melt Rate, Durability, & Cost-Effectiveness.
The melt rate is the rate at which the tank melts the adhesive pellets as they are filled into the reservoir. This is where the tank capacity comes into play. Before moving forward with any hot melt adhesive system, first you need to understand how many pounds you need to melt per hour. The melt rate is dependent on how many hoses and gun applicators you are running and how many boxes are being sealed per minute on your packaging line. The most common tank capacity is the 20 lb. (10 Liter) ProBilt™ 20, with a melt rate of 23 lbs. per hour. If you are only running one line with one hose and gun applicator, then you may only need the 15 lb. (7 Liter) ProBilt™ 15 which melts 18 lbs. per hour or the 12 lb. (6 Liter) unit which melts 15 lbs. per hour.
Depending on how many shifts you are running, you need a melter that will work consistently and effectively. All ProBilt™ melters come with a 10-year heater warranty, which is the highest in the industry. In addition, all melters come standard with 4 hose / 4 gun capability and a set-back functionality that allows for easy start up and shut down. ProBilt™ melters are constructed out of 316 stainless steel, not only for its sleek look that will seamlessly blend with your packaging line, but also for its durability and sustainability on your production line floor.
The economy is a huge question mark lately, being impacted by the lasting effects of the COVID-19 pandemic. With that, large CPGs are cutting back not only in personnel but in spending budgets for packaging. These tighter budgets won’t always allow for a buyer to simply purchase the latest Nordson® melter. Here at Universal Systems SE, we have seen more and more companies trying to repair older melters and plug any current issues with band-aids to stretch their fixed budgets as far as they can. Since we manufacture parts that are compatible with old Nordson® tanks, we have been able to help a lot of companies cost effectively navigate the times. In addition to our parts business, all of our ProBilt™ series melters are cost effective replacements for any Nordson®. We are currently running a 15% off and free shipping in the USA promotion to help out CPGs and support US based companies.
To learn more about Universal Systems SE’s ProBilt™ series of melters and components, please reach out to a customer service representative at firstname.lastname@example.org or call (561) 272-5442.
Every year, some hot new product comes out and promises you the world. Then, when you get it, you realize that the “latest technology” is more frustrating and causes more trouble than it’s worth. Not only does it cost you more money initially, the maintenance and unreliability seem to also increase. The same thing has happened with some of the largest hot melt manufacturers. Their latest technology that has been implemented in all of their new systems to make your line operator’s life easier, can potentially make it harder and more expensive.
Which is why Universal Systems SE is dedicated to keeping our current high standard of precision engineering, but with our existing look and ease-of-use technology. Universal Systems SE is standing behind our current key attributes: reliability, long life span, economical pricing and simple but effective operation. Why add more bells and whistles when the current tried and true works just fine.
Tried and True ProBilt® Product Features:
10-year tank warranty.
User-friendly design for easy installation, simplistic operation, and minimal maintenance.
AccuScan Control System with on board microprocessor and keypad controls for melter, heated hoses and adhesive applicators.
“One touch” setback key for standby mode.
Parent machine interfacing.
External fault alarm interfacing.
Under temperature and over temperature protection on all zones.
Faults trigger both visual indicators as well as an audible alarm.
RTD temperature control with self-diagnostic digital temperature readings within +/- 1 degree.
LCD display for both temperature and system status.
Teflon® coated tank.
Stainless steel and high strength aluminum construction allows easy cleaning and unequaled durability.
14:1 ratio balanced pneumatic piston pump.
Self-sealing, full opening lids for easy loading and maintenance.
There are five main components that should go into your search for the right hot melt equipment manufacturer: Innovation, Knowledge, Quality, Price & Compatibility. Universal Systems SE has made it our top priority, over the last four decades, to ensure our customers get all of these. We do not compromise price for service and we stand behind all of our equipment with the strongest warranty program in the industry.
Universal Systems SE has just launched our latest product in the ProBilt Series: The ProBilt Phoneix. This on-demand melter system allows packagers to melt and use adhesive only when they need it. The adhesive storage container eliminates the need to manually fill the melter tank, reducing adhesive spillage and waste, while improving safety. Our state of the art adhesive sensor and innovative vacuum technology will automatically fill your tank with adhesive to your desired level.
Universal Systems SE also manufactures 8 lb., 12 lb., 15 lb., 20 lb. and 40 lb. tanks that are the same footprint as most Nordson melters on the market. Our ProBilt systems continue to lead the industry with minimal down-time, easy to operate components and consumer flexibility.
When researching manufacturers to partner with, knowledge and availability are key. Our technicians have over 40 years’ experience in the hot melt industry and can help solve almost every issue you might run in to, because we have seen it all! Universal Systems SE’s facility is located in the United States and we are available for service calls, even if it’s a video conference to walk through any issues you might be experiencing.
Warranty, Price, Compatibility
We stand behind all of our products 100%, which is why we offer the longest warranty in the industry on our ProBilt tanks, 10 years! Also, if you find a cheaper rate from another direct manufacturer, which we are confident you won’t, we will match that price! Whether the pricing is from Nordson, Graco, ITW Dynatec or Robatech. We also ensure that almost all of our equipment is Nordson compatible. This means that even if you bought your main hot melt machine from Nordson you don’t have to stay with them forever. Even if your Nordson melter has been discontinued, such as the 2300 or 300 Series, you can still buy all of your replacement parts from USSE. We will warranty all parts that you buy from us, even if they are being paired with a competitor part.
For more information on Universal Systems SE or the ProBilt Series, please contact us at (561) 272-5442 or email us at email@example.com.