The scenario is usually the same, a packaging line melter goes out in the middle of the busiest time of year. Most commonly, maintenance directors and buyers simply replace the current OEM melter with the latest model. That is not always necessary. Universal Systems SE ProBilt™ melters have the same footprint as most all Nordson® systems and can easily fit into where the original tank is positioned. Just because your current packaging line has a Nordson® melter does not mean you have to replace it with another expensive Nordson®. Plus, all of our ProBilt™ melters are in stock and can ship same day!
There are several key points to take into consideration when choosing a hot melt system for your packaging line. The most important are: Melt Rate, Durability, & Cost-Effectiveness.
The melt rate is the rate at which the tank will melt the adhesive you put into the reservoir. This is where the tank capacity comes into play. Before moving forward with any hot melt adhesive system, first you need to understand how many pounds you need to melt per hour. The melt rate is dependent on how many hoses and gun applicators you are running and how many boxes are sealed per minute on your packaging line. The most common tank capacity is the 20 lb. (10 Liter) ProBilt™ 20, with a melt rate of 23 lbs. per hour. If you are only running one line with one hose and gun applicator, then you may only need the 15 lb. (7 Liter) ProBilt™ 15 which melts 18 lbs. per hour.
Depending on how many shifts you are running, you need a melter that will work consistently and effectively. All ProBilt™ melters come with a 10-year heater warranty, which is the highest in the industry. In addition, all melters come standard with 4 hose / 4 gun capability and a set-back functionality that allows for easy start up and shut down. ProBilt™ melters are constructed out of 316 stainless steel, not only for its sleek look that will seamlessly blend with your packaging line, but also for its durability and sustainability through the tough elements a packaging line ensures.
The economy has become a roller-coaster in the last year. With that, large CPGs are cutting back not only in personnel but in spending budgets for packaging. These tighter budgets won’t always allow for a buyer to simply purchase the latest Nordson® melter. Here at Universal Systems SE, we have seen more and more companies trying to repair older melters and plug any current issues with band-aids to stretch their fixed budgets as far as they can. Since we manufacture parts that are compatible with old Nordson® tanks, we have been able to help a lot of companies cost effectively navigate the times. In addition to our parts business, all of our ProBilt™ series melters are cost effective replacements for any Nordson®.
To learn more about Universal Systems SE’s ProBilt™ series of melters and components, please reach out to a customer service representative at firstname.lastname@example.org or call (561) 272-5442.