With the reopening of many packaging facilities in full swing, here at Universal Systems SE, we are getting a lot of technical calls that pertain to glue and not the packaging machinery itself. Not a lot of technicians realize that some of the problems they are experiencing with their equipment are actually being caused by the glue. By the way, this has always been the case. Since knowledge is power, below are 2 issues that we get a lot of calls about that are glue related and not machine related.
#1 Glue Related Issue – Char
Many line operators and line technicians have experienced char in their hot melt application systems and most of them think that the char is caused by the machine. That is not actually accurate. The hot melt tank will heat the glue, but only to the temperature that is set by the operator. It is very important to understand how recommended temperature ranges effects viscosity which allows the glue to run at its optimal level. Most charring is due to overheating the glue. That char will travel through your application equipment and cause clogs which will require you to replace equipment or its components. However, that will not fix the long-term problem of charring. If the charring is not corrected, when you install the new equipment it will clog again. That is not a machinery issue, that is a glue issue. Our suggestion is to speak with your glue provider and find out all of the specifications on the glue you are using such as ball and ring, optimal temperature and viscosity. That will save you a lot of money in the long run and should reduce any excessive charring.
#2 Glue Related Issue – Coagulation
There is no doubt about it, glue is expensive. In most cases, the glue can be more expensive than the application equipment. The reason is because most facilities use a lot of it. As we all know, the world has been a crazy place this year, and with the re-opening of a lot of packaging plants, comes new, reduced operating budgets. We have heard from a lot of customers that in order to save on costs, they have had to change glue, whether it is moving to a more inexpensive glue, or a system that lays down less glue but with a stronger adhesion. Either way, if you change glue and do not meticulously clean your glue application system, you can have coagulation causing clogs. We recommend cleaning your tank and hoses with Purge Plus or a similar cleaning substance before changing glues.
At Universal Systems SE, we are always happy to help with any issues that you might have. But keep in mind that sometimes, your issue might be something that you need to discuss with your glue manufacturer. In the meantime, please feel free to reach out to us with any questions at email@example.com.