Mini Modules and Gun Applicators
Several Years ago, Nordson® introduced the MBII gun applicators and modules. Initially, the small module and applicator manifold was made for packaging lines that were designed with little room for glue application. Then, they started offering them in a low-profile design for case sealers. Over time, Nordson® started using MBII guns and modules as standard equipment on all of their packaging line set ups. Why? Even though it is not clear the need for the MBII in most standard application setups that have room for an H200, the price surely made it a much more profitable product in Nordson’s® arsenal. The MBII is more than double the price of a standard H200 module and gun applicator.
The key question to ask is, when do you need to use a MBII applicator versus a standard H200 applicator? Like we mentioned earlier, a MBII applicator is essential on packaging lines that have about half the space to fit an applicator than typical lines. Not only is the manifold about half the length and height of a standard H200 gun, the modules measure a mere 1” x 2” in size. Additionally, MBII applicators have the filter built into the manifold. This is a space saver because it eliminates the need for the in-line filter assembly off of the back of a standard gun into a hose. This allows for the MBII gun to attach directly to the hose and still be able to filter out all of the char and debris travelling through the hose and into the manifold. MBII guns also are air open, air close systems, so you can only run them if you have your line set up with two air lines running to the gun. MBII modules do still fit all of the standard H200 nozzle tips. So, even though you cannot use your standard H200 module on the MBII manifold, you can use all of your current stock nozzles.
If your new packaging line comes in with a MBII system installed, our recommendation is to measure the space where the applicator is mounted. If you have room for a standard H200 applicator and in-line filter assembly, you can always switch to a standard H200 set up. The only thing you will need to change out is the gun, filter assembly and solenoid. This will save you thousands of dollars in the future…but only if it fits.
For more information about the mini modules and applicators manufactured by Universal Systems SE, please visit https://www.ussefl.com/products/applicator-gun-heads/h201t-guns/#1544128561143-eeff57c6-9818.
The Importance of Using Aluminum for Manifolds
Universal Systems SE manufactures high quality hot melt application manifolds that will work with most all hot melt application systems. We understand the importance of durability, consistency and effectiveness in packaging manufacturing, which is why we use 6061T aluminum when making all of our manifolds.
What is a Manifold?
When evaluating what you need for your hot melt application system, it is important to understand each item that makes up the application gun. The manifold is the aluminum gun body, that houses the heater & sensor, and is where the modules mount.
Why do we use Aluminum?
Aluminum is used on all of our hot melt applicator manifolds because it is an excellent conductor of heat and dissipates heat very efficiently. Aluminum also has a very high strength to weight ratio, meaning that although it is light-weight, it is extremely strong. Its strength is what allows for peak performance during the rigorous packaging process. It is also non-toxic, cannot burn and is easily recyclable.
Why do we use 6061T Aluminum?
All of Universal System’s ProBilt™ manifolds are manufactured using 6061T aluminum. 6061T aluminum is aviation aluminum and used for the building of all jet aircrafts. This will extend the lifespan and durability of the manifold and increase it’s on the floor performance.
For more information on how to buy a hot melt gun applicator or manifold, please reach out to sales@ussefl.com or call (561) 272-5442 today!