One of the most dangerous, yet inevitable, occurrences running hot melt systems in your packaging lines is char. Universal Systems SE has updated technology running in our ClearFlow hoses that reduces char, however the main char that runs through the hoses comes from the tank itself. Once your tank is infested with char, no matter how efficiently your hoses and guns run, there is always the potential to transfer this char onto your packages. You also run the risk of char clogging your nozzles and modules, which can back up through your guns and kill your pumps. Our Universal Systems SE technicians have seen it all. That is why we have created a list of preventative tips that each line operator should follow to effectively reduce char and keep your ProBilt® system running at top capacity.

Preventative Maintenance

Universal Systems Se recommends a complete hot melt system cleaning at least twice a year using our Purge Plus system cleaner.

Contaminated Adhesive

Hot melt adhesive should always be stored in a strong container such as a heavy-duty plastic waste container. Do not set boxes or open bags of adhesive on the floor or on the top of the container. The container should be labeled “Adhesive Only” and include your adhesive part number.

Low Quality Adhesive

With hot melt adhesives, higher price usually means higher quality, the opposite is also true. Adhesive manufacturing is a highly un-regulated industry and many companies use low cost waxes and fillers in their products to reduce cost. These products tend to burn quickly. Due to the fillers and heavy waxes, low cost adhesives can greatly reduce your adhesive mileage whereas high quality adhesives are lighter and have a lower specific gravity. The bottom line is a higher dollar per pound does not necessarily translate to higher packaging costs. We also recommend that you do not mix old adhesives with new brand adhesives. Please read our past blog to help you understand why.

Old Equipment

Hot melt systems are not cheap, so most of the ones in operation today have been on their packaging lines for 10 – 20 years, whether they are running properly or not. That means that most likely, these older machines have char built up in their tanks. It may be time to evaluate the performance and efficiency of your aging equipment and trade up to a new ProBilt®.

To get the latest pricing on ClearFlow hoses, Purge Plus system cleaner or ProBilt® adhesive melters, please email sales@ussefl.com. If you are experiencing issues with char, please feel free to call one of our technicians at (800) 848-5018 and we would be happy to help you.