It’s that time of year again, when the days are longer and everyone is motivated to do some Spring Cleaning. That should also apply to your hot melt equipment. Like most machinery, your hot melt tanks, hoses, guns, filters and nozzles need regular preventative maintenance and cleaning. Below is the maintenance recommendation schedule that Universal Systems SE provides to all of its customers regarding our ProBilt line of products.
ProBilt Melters
- Replace tank filter every 500 hours or 3 months, whichever comes first
- Clean tank with Purge Plus every 1,000 hours or 3 months, whichever comes first
*stock 2 – 3 tank filters per tank and 1 Purge Plus cleaner
ProBilt Pumps
- Clean and Flush Pump every 2,500 hours utilizing Pump Service Kit B100-900
- Replace Pump every 5,000 hours or until Pump stops pumping
*stock at least 1 pump to reduce any potential down time
ProBilt Hose
- Flush out hoses when cleaning tank with Purge Plus every 1,000 hours
*make sure to disconnect hoses from guns when flushing with Purge Plus
*stock at least 1 hose per length needed to reduce any potential down time
In-Line Filters
- Replace every 150 hours
*stock 5 spare filters for each filter body
Gun Applicator
- Only replace when it stops functioning –either the heater or RTD
*stock 1 spare gun applicator per line
Module
- Replace module every 1,000 hours or every 6 months, whichever comes first
*stock 2 – 6 modules depending on how many modules are on each gun being used
Nozzles
- Replace nozzles every 120 hours or when they clog
*stock a minimum of 6 nozzles per line
*If you clean nozzles, we recommend cleaning them with kit # 1658 every 100 hours or when they clog
To keep your stock up to date please give us a call at (561) 272-5442. A USSE sales rep will quote you pricing and lead time on anything you need.