Case & Carton Packaging for Pharmaceuticals

The pharmaceutical industry is no stranger to growth, but over the last few years, it has seen an unprecedented increase. Because of rising healthcare spending, the launch of new treatments, and rising frequency of chronic diseases, the pharmaceuticals market is expanding. This will allow low-cost generic alternatives to enter the market, which will spur demand for pharmaceutical packaging equipment.

When you think about pharmaceuticals, packaging isn’t top of mind, but it is a key factor in distribution and cost effectiveness. At Universal Systems, we realize that pharmaceutical companies need precise, accurate, reliable packaging equipment in order to get the latest medications out into the world. We have been working on perfecting specific precision hot melt application equipment for over 35 years when we initially launched our ProBilt® Zero Cavity Modules.

Zero cavity modules apply a thin line of hot melt along medication boxes, effectively sealing each box for mass distribution. Zero cavity modules have a very specific look, with a matched needle and nozzle assembly which eliminates minute material pockets that can cause nozzle clogging or dripping. They also come with an E-Z Micro Adjust option to that allows the operator to “dial in” on an exact adhesive extrusion and precise bead placement. This unique technology allows for line operators to place a small amount of glue on a small, predetermined location without creating any stringing. Typically, because of the precision requirements, most zero cavity modules are made with either a .008 or a .012 diameter orifice, so that there can never be too much glue applied.

Not many hot melt application manufacturers offer zero-cavity modules. At Universal Systems, we believe in innovating for the pharmaceutical industry rather than trying to use case and carton machines for such precision application.

If you are sealing pharmaceuticals, call or email us today for a quote!

Read More

When to Use Micro-Adjust Modules

Hot melt system modules are located on the front of your applicator guns. There are several different types of modules and in most cases, they can be easily replaced on the manifold versus replacing the entire gun assembly. Changing out a module is a more cost-effective way to increase productivity and lower glue costs. Typically, modules need to be replaced when they are having glue dripping issues or major leaking from the nozzle. This is caused by normal wear or char getting stuck in the piston chamber, not allowing it to seat securely.

When replacing a module, you have the option of buying a standard case sealer module or a micro-adjust module. This refers to the module’s adjustment cap on the module body. A standard case sealer module comes pre-set and typically needs no adjustment. This is our most popular style module. A micro-adjust module cap is typically sold on Zero Cavity or ProBead Reduced Cavity modules. These modules have a user-friendly adjustable screw top that changes the pressure of the glue through the nozzle. This allows the operator to dial in a precise glue bead. Typically, zero cavity and ProBead reduced cavity modules have micro-adjustable caps for this reason. For example, they are used on medication boxes or beauty supplies. Another advantage to a zero cavity or ProBead reduced cavity micro-adjust module is the self-cleaning functionality, limiting charring and clogging.

For more information about micro-adjust modules please reach out to a technical sales rep at sales@ussefl.com or call (561) 272-5442.

Read More

Packaging in the Pharmaceutical Industry

It’s been a wild ride over the last year, but the pandemic has brought on several advances in the pharmaceutical industry. Hot melt application in the pharmaceutical industry has always been important, but now more than ever. As the US pushes forward with millions of vaccines, each medication needs to be precisely packaged to make sure that it arrives safely to its destination.

Universal Systems manufactures ProBilt Zero Cavity Modules to apply a thin line of hot melt along medication boxes. Zero cavity modules have a very specific look, with a matched needle and nozzle assembly which eliminates minute material pockets that can cause nozzle clogging or dripping. They also come with an E-Z Micro Adjust option to that allows the operator to “dial in” on an exact adhesive extrusion and precise bead placement. This unique technology allows for line operators to place a small amount of glue on a small, predetermined location without creating any stringing. Typically, because of the precision requirements, most zero cavity modules are made with either a .008 or a .012 diameter orifice, so that there can never be too much glue applied.

Because zero cavities have a matched piston nozzle needle and seat, when they finally wear out, most manufacturers require customers to replace the entire module. Universal Systems does not. We manufacture a rebuild kit specifically for zero cavity modules for a fraction of the price of replacing an entire module. Check out our rebuild kits here: https://www.ussefl.com/products/hot-melt-modules/module-rebuild-kits/.

Not many hot melt application manufacturers offer zero-cavity modules. Luckily, here at Universal Systems we have been manufacturing this specific module for over 25 years. If you would like to learn more about zero cavity modules or get a price quote, please reach out to sales@ussefl.com or call (561) 272-5442.

 

Read More