There are several different set ups available for your hot melt application. That’s because not all industries use glue application for the same reason. The most common form of hot glue application is standard case packers for mass production high speed packaging. Typically, those lines use standard H200 modules. However, glue application is used to seal other, more specific products. For example, swirl pattern modules are used for glue application on feminine hygiene products, diapers and also for sealing air filters. This blog is going to specifically explain zero cavity modules and what industries use them and why.
Zero cavity modules have a very specific look, with a nozzle head attachment rather than a screw on nozzle. They also come with an E-Z Micro Adjust attachment to manage precision glue application. This nozzle & micro-adjust feature is custom manufactured for precise glue placement on smaller boxes, such as crayon boxes or pharmaceutical products. This unique technology allows for line operators to place a small amount of glue on a small, predetermined location without creating any stringing. Typically, because of this precise requirement, most zero cavity modules are made with either a .008 or a .012 diameter orifice, so that there can never be too much glue applied.
Because zero cavities have a matched piston needle and seat, when they finally wear out, most manufacturers require customers to replace the entire module. Universal Systems does not. We manufacture a rebuild kit specifically for zero cavity modules for a fraction of the price of replacing an entire module. Check out our rebuild kits here: https://www.ussefl.com/products/hot-melt-modules/module-rebuild-kits/.
Not many hot melt application manufacturers offer zero-cavity modules. Luckily, here at Universal Systems we have been manufacturing this specific module for over 25 years. If you would like to learn more about zero cavity modules or get a price quote, please reach out to sales@ussefl.com or call (561) 272-5442.