Hunting Down Old Adhesive Melter Parts
An interesting fact about the packaging industry that most people don’t realize, is that purchasing agents become avid internet hunters when it comes to finding parts for their old equipment. There are several resources out there, the largest being eBay, for purchasing agents to find and buy parts for their old adhesive melters. The problem is, when buying from a bid platform, you never know what you are going to get. If you are looking for an old part, for a melter that is more than 20 years old, the part you find online could either be used or the wrong part. Also, with most online bid platforms, you get what you get. There are no returns or exchanges for your actual part. And in most cases, you get what you pay for.
Universal Systems SE realizes how important it is to be an online resource of purchasing agents, which is why we have invested in becoming “searchable”. In the last couple of years, we have launched a new website, added more products, and increased the number of cross-reference IDs on our website. We have added pictures, spec sheets and custom contact forms to help purchasing agents get exactly what they need. We are also working on making sure that we show up in the search results when purchasing agents Google old part numbers or manufacturers.
The benefit of buying from USSE is that all of our equipment is new, in stock and you can talk with a technician to make sure it will fit with your current equipment. Another key aspect of working with USSE is our staff of knowledgeable engineers that have been around adhesive melters and packaging line equipment for over 40 years. If you have a question about your old melter, we are most likely the only company in the industry that can answer it.
To test out the knowledge of our technicians, give us a call at (800) 848-5018. We are certain we can get your old equipment back up and running in record time.
New Year, New Melter
A trend that we were seeing in 2019 in the packaging industry was repair, repurpose, repeat. No one seemed to want to spend the money on new equipment. It did not really come as much of a surprise since the political atmosphere of the United States was so polarizing. With inconsistency in government and leadership, comes inconsistency in the business world. Large CPGs were not interested in allocating budget to new equipment, but trying to repair old equipment.
What large CPGs fail to realize is that band-aiding an issue with a packaging system, only delays the inevitable. Having to invest in new equipment. This process can be a long and tedious one. Getting multiple quotes from different manufacturers and lead times. Also, needing to know availability and compatibility with your current packaging line. The new tank buying process could take months, and if your old equipment fails while in the middle of that process, your lines could be down and production at a standstill. That is a very big risk to take.
At Universal Systems SE, we offer six different hot melt tanks and application systems that could fit almost any packaging line. All of our ProBilt™ tanks are the same physical footprint as most Nordson® tanks and compatible with most Nordson® equipment, both old and new. Universal Systems SE also offers a Trade In Trade Up Program, where you can send us back your old melter, no matter who manufactured it, and we will give you a credit towards your new ProBilt™ tank.
All Universal Systems SE standard ProBilt™ systems are in stock and can ship within one business day of ordering. So, if you are ever in a bind, or your current systems goes down and is unrepairable, we can have you up and running with a brand-new system the next day. The only system that requires a lead time is the Phoenix Auto-fill System, which is usually customized per order.
Another unbeatable aspect of investing in a ProBilt™ systems is the 10-year heater warranty that Universal Systems SE offers. It is the longest warranty in the industry.
For more information on Universal Systems SE’s line of ProBilt™ equipment or how you can get a new melter in 2020, call us at (800) 848-5018 or email sales@ussefl.com.
How Winter Weather Impacts Your Packaging Line
As we head into the New Year and the weather gets colder, you may be experiencing inconsistencies with the adhesives on your packaging lines. What most line operators and maintenance managers do not realize is that the location of your packaging line in the plant can play a large role in the dependability of your adhesive.
This time of year, we receive several troubleshooting calls regarding hot melt consistency, heated hose and gun temperature consistency and glue stringing. It is important to take the external environment into consideration when attempting the first step in troubleshooting some of these problems. One of the first questions to ask is: where is your packaging line located? For example, if it is at the end of the packaging process, which it most likely is, then it might be on the exterior wall of your plant. Or it might be near an external door or window. If it is on the outskirts of the plant facility, and you are located in a part of the United States that is cold in the winter, then the outside temperature could be impacting not only the viscosity of your glue, but the heating time of your glue and its adhesion ability.
Every time your line operator opens the fill door on the hot melt tank, the external air hits the existing glue and cools it off. Even if the lid on your tank is only open for a few minutes, that could impact not only the current glue in the tank reservoir, but the glue you are adding to the tank. Especially if you are adding in cold glue. If your glue pellets are colder than normal, it will take a longer amount of time to heat them. A solution to this issue would be to invest in an auto-fill hot melt application system. Universal Systems SE manufactures the ProBilt™ Phoenix Auto-Fill Application System. Not only will this system help in the winter months, it helps all year long by drastically reducing the number of times your line operator needs to add glue pellets.
Another important task would be to inspect your system setup for any cold joints. A cold joint would be any unnecessary extensions that you have added throughout the adhesive application process. Most cold joints are found on older machines that used larger sized extensions and filter housings. For example, the older gun filter assemblies had larger filter housings and longer extension joints, that are unnecessary and can inhibit the consistency of hot melt flow. The more cold joints on the system, the more inconsistent the glue will heat and stay heated throughout the entire application process.
If your main problem is glue stringing in the colder months, an easy solution would be to shorten the distance from the nozzle tip to the top of the box. Limiting the amount of time the glue has to travel in the air will help to lessen the problem of stringing, which can cause a weakened seal on the box.
For any further information on the ProBilt™ Phoenix Auto-Fill Application System, or to speak to a technician about any troubleshooting of your adhesive application system, please call Universal Systems SE at (800) 848-5018 or email sales@ussefl.com.
Utilizing Key Features of the ProBilt™ Hot Glue System
There are a few brands to consider when shopping for a hot melt system for your packaging line. Universal Systems SE’s ProBilt™ product line has been around for over 40 years and has several key features that can help influence purchasing agents, as well as line operators, on why it is the best in the industry.
4 Hose / 4 Gun Standard Capability
Unlike any other hot melt tank option on the market, the ProBilt™ line of melters all come equipped with 4 hose and 4 gun capability. This is a standard option that is usually an add on from other manufacturers, like Nordson®. Nordson® has both the 2 hose/ 2 gun and 4 hose/ 4 gun melters, each differing in price. The ProBilt™ melters all come with 4 hose/ 4 gun capability at a lower price point than any Nordson®. This allows our customers versatility and the option to grow.
Easy to Program Control Board
One of the many benefits to owning a ProBilt™ system is the easy to operate, AccuScan™ Control Board. If you are plugging in a brand new tank, the board will be programmed to our factory settings. The line operator, can scan through the hose, gun and tank settings and set them to the temperatures needed. There are also a few fail safes installed in the machine. For example, if it is a cold start set up, the hoses and tank will heat first, then the guns will start to heat once the hose and tank are within 35 degrees of the set point. The reason for this is so that the gun doesn’t char, since the gun heats up faster than the hose and tank. Once temperature is reached, the “Heat On” light will blink and you are ready to use. The control board also comes equipped with alarm settings and a set back functionality, our next two key features.
Set Back Functionality
The set back functionality is one of the most important features that comes standard on all ProBilt™ tanks. Essentially, when the shift is over and you no longer need to run your packaging line, you push the set back button. This will “set back” the temperature of the tank, hoses and guns to 165 degrees. Allowing the glue already in the system to sit overnight without charring. When the morning comes, or the next shift starts, simply hit the set back button again, and all previous temperature settings will re-engage. This will decrease the start up time on the hot melt system significantly and allow your lines to be fully operational within minutes.
Alarm Options
Another key feature to the AccuScan™ Control Board are the alarm options it provides. The first alarm option allows for the panel to tie to an alarm light in your facility. In case anything happens that stops the system from running effectively, an alarm light can go off, alerting the line operator immediately. Another feature is the ability to tie it to the packaging line itself, called PMI or Parent Machine Interface. Parent Machine Interface will signal the packaging line when the glue is at full temperature thus preventing the line to start up until it receives the signal.
Please watch our video on how to set the ProBilt™ melter temperatures. For more information on our ProBilt™ systems please call today (561) 272-5442 or email sales@ussefl.com
How an Auto-fill System Can Increase Safety & Productivity
The most common type of hot melt system used on packaging lines is a manual fill system. With manual fill systems, there are several roadblocks that can occur with safety and productivity that many companies are experiencing. Universal Systems SE took those concerns into consideration when designing our ProBilt™ Phoenix auto-fill system.
It is first important to understand how a hot melt system works. Hot melt adhesive application systems house a Teflon® coated interior tank, where the glue pellets are added and melted. The glue is then pumped out, travelling through a heated hose, into an applicator gun, through a module and nozzle, finally landing the glue at its final destination.
Universal Systems SE has ProBilt™ tanks that range from an 8 lb (4L) capacity, up to a 20 lb (10 L) capacity. Depending on how many hours per day the packaging line is operated, and the size of the glue tank needed, line operators are in charge of making sure that there are always glue pellets in the melter. Running low on glue inside the melter tank can cause a plethora of issues with the system. One of the most common issues is running the pump dry. If a line operator lets the tank run dry and the pump “shotguns”, the pump or shifter can fail. Honestly, that is the most common cause for pump rebuilds that we see in our shop. The easy solution to this is making sure that the tank is always full with pellets.
However, consistent tank filling can increase the risk of other potential issues. The first, is that it increases the risk to employees. Since the tank runs anywhere between 200 – 400 degrees, it is HOT. If a line operator is in a rush or makes one careless move, they can easily be burned by the pot. Another issue is that when you open the tank lid to refill with pellets, cold air flows into the tank and cools down the internal temperature. If the glue is continuously getting hot and cold, it could negatively impact its bonding ability.
These potential issues prompted Universal Systems to develop and release our ProBilt™ Phoenix auto-fill system in 2018. Unlike with manual filling, the automatic filling process does not require the line operator to fill glue pellets directly into the hot tank. Operators fill the free-standing container, which is separate from the tank. The glue pellets are then deposited into the internal pot via the vacuum and wand system when the internal tank glue level is low. The Phoenix is available in two tank capacities, the 15 lb and 20 lb units. Each glue container has maximum and minimum fill lines so that line operators know how much or how little to fill the pellets. Since the containers can hold much more glue than a standard heated pot, line operators no longer need to worry about checking the melters as often as with a manual system. This will also ensure that line operators will not get burned and that the glue inside the pot will stay consistently heated, creating maximum bonding ability.
For more information about the ProBilt™ Phoenix auto-fill system, contact Universal Systems SE at (561) 272-5442 or email sales@ussefl.com.
CPGs Wrestle with Workforce
If you follow the packaging industry, whether through news articles, industry periodicals or first hand through direct buyers at CPG companies, one of the largest drivers in packaging is the stress on workforce demands. This can include how difficult it is to find reliable workers that are dedicated to the success of the company. It can also be in the aspect that most of the line operators working the packaging line equipment are not trained properly on that piece of equipment and all of its capabilities.
As the packaging industry tries to modernize technology, not all of their workforce can keep up. As a hot melt equipment manufacturer, one of our core competencies is our knowledgeable technical support. If you have any Universal Systems SE equipment or ProBilt™ machines on your packaging lines, you can rest assured that you will get speedy, knowledgeable sales and technical support. However, in many instances, line operators do not have that type of experience or knowledge base. That can lead to “on the fly” fixes, which usually equates to weakened product and voided warranties. At Universal Systems SE we understand that knowledge is power, and we want to make line operators jobs easier, not harder. With that in mind, we have kept all of the ProBilt™ hot melt application systems uniform and easy to operate. We also try to make our clients smarter when they call with issues, asking questions to help them learn or giving them some simple troubleshooting tips to follow for the future.
In addition to being able to help line operators with questions and knowledge, we also make sure to include in every shipment all of the pertinent manuals and information guidelines needed. For example, if your company is ordering ClearFlow™ heated hoses (Universal Systems SE’s proprietary line of heated hot melt hoses), each shipment will include installation and care instructions. The same goes for our ProBilt™ applicator guns. With the purchase of any ProBilt™ application gun, we include a list of maintenance recommendations on the gun, modules and nozzles.
So, as CPGs continue to have concerns with their workforce, we here at Universal Systems SE we will continue to do everything in our power to ensure that we keep them knowledgeable on our equipment.
To learn more about our ClearFlow™ hoses or any other ProBilt™ products, please reach out to sales@ussefl.com or call (561) 272-5442.
Cost-Effective Manufacturing
As we continue through 2019, it is clear that big brand CPG budgets are getting tighter when it comes to packaging. Larger companies are no longer bleeding money on big brands that offer not much more than a brand name and pretty blue logo. We have often asked ourselves how companies like Nordson® can get away with charging so much for the same quality product that Universal Systems SE manufactures. Especially since those big brands are not even manufacturing in the USA. That trend is starting to change.
As the American economy continues to change, it is clear that companies need an alternative to the brand name big price tags. It all comes down to shopping around for quality manufacturing that can be done in a more cost-effective way. And yes…it can be done. Cost-effective manufacturing should be the main focus of all companies when it comes to packaging their products. Americans no longer care about a name, they care about performance, quality and cost. Just because it is the most expensive thing on the market, doesn’t make it the best or most reliable. And that rings true for packaging manufacturers as well.
Many CPGs are losing the battle for shelf space and margin growth, which is increasing the pressure on suppliers such as packaging manufacturers to decrease costs. With more brands on the shelf and less market share, big CPGs need to start thinking smartly about their packaging solutions. It might not be the best idea to bring in a company like Nordson® to customize a hot melt solution that will cost you an exorbitant amount of money and take 6 months to get, when you can go with a company like Universal Systems SE who has engineers with over 40 years of experience that actually understand what you need because they have pretty much seen it all.
Not only is cost-effective manufacturing a pull in the marketplace, but knowledgeable customer service and support. If your packaging line goes down, it could cost you thousands of dollars a minute. A large brand with an untrained rep isn’t going to be able to get you up and running with a phone call. Universal Systems SE will! Think about that the next time you place an order for a new hot melt system or components.
Whatever you might need for your hot melt machines, we manufacture it at our Florida facility. Whether it is heated hoses, applicators, filters, modules, nozzles, etc. We also can walk you through troubleshooting any issues or help you with customized set ups. Call Universal Systems SE today at (561) 272-5442.
The Importance of Using Aluminum for Manifolds
Universal Systems SE manufactures high quality hot melt application manifolds that will work with most all hot melt application systems. We understand the importance of durability, consistency and effectiveness in packaging manufacturing, which is why we use 6061T aluminum when making all of our manifolds.
What is a Manifold?
When evaluating what you need for your hot melt application system, it is important to understand each item that makes up the application gun. The manifold is the aluminum gun body, that houses the heater & sensor, and is where the modules mount.
Why do we use Aluminum?
Aluminum is used on all of our hot melt applicator manifolds because it is an excellent conductor of heat and dissipates heat very efficiently. Aluminum also has a very high strength to weight ratio, meaning that although it is light-weight, it is extremely strong. Its strength is what allows for peak performance during the rigorous packaging process. It is also non-toxic, cannot burn and is easily recyclable.
Why do we use 6061T Aluminum?
All of Universal System’s ProBilt™ manifolds are manufactured using 6061T aluminum. 6061T aluminum is aviation aluminum and used for the building of all jet aircrafts. This will extend the lifespan and durability of the manifold and increase it’s on the floor performance.
For more information on how to buy a hot melt gun applicator or manifold, please reach out to sales@ussefl.com or call (561) 272-5442 today!
How to Keep Old Melters Operable
Do you have an old series 2300 or 3000 melter that you are still using but need to find parts for? If you do, your packaging line is running a melter that is 15 – 20 years old. That means that your line operators are maintaining your packaging lines well and spending money in the right areas to keep efficiency and durability a priority. With that said, not everything will last forever. While you can probably keep the control panels of the 2300 or 3000 melter, some of the internal and exterior parts may need to be replaced. The reality is that Nordson® no longer supports these tanks. However, Universal Systems SE does. Universal Systems SE manufactures pumps, filters, hoses, guns, modules and nozzles that are compatible with your old melters.
Pneumatic Pumps
The first thing to go on your old melter, will most likely be your pump. Once that stops working, it will become very clear that your OEM no longer manufactures replacements for that part. So now you have to decide between purchasing a new melter from them for $15,000+, or trying to replace your pump. Universal Systems SE manufactures new series 2300 and 3000 pumps for a fraction of the price of a new Nordson® melter. Check out our full line of pneumatic pumps.
Actuator
If you have experience with rebuilding pumps, Universal Systems also manufactures the pump shifter and fork for the ProBilt™ series 2300 and 3000 pumps. This is another item you will not be able to find with the OEM because it has been discontinued.
Tank Filters
Since your series 2300 or 3000 melters have been operating on the line for so many years, your line operators probably change out the tank filters frequently. As the years have gone by, you may find it more difficult to find reasonably priced, or readily available tank filters. Universal Systems manufactures the tank filter assemblies, filter cores and filter screens to fit your series 2300 and 3000 melters.
Same Footprint
If you have gone through all of the steps to fix the problem with your old melter and find out that it is the control panel, which has been discontinued, Universal Systems SE has a solution for that as well. Our ProBilt™ melters have the same footprint and dimensions as your current series 2300 or 3000 melter. That means that your NEW ProBilt™ melter, that comes with a 10-year heater warranty, will fit right in where your old melter comes out.
For more information or to contact a technician that can help you troubleshoot issues with your old melter, call (561) 272-5442 or email sales@ussefl.com.
Simplify with the AccuScan™ Control Panel
Universal Systems SE manufactures a premiere line of hot melt adhesive systems. Our ProBilt™ line of tanks all come with our patented AccuScan™ Control Panel. The AccuScan™ Control Panel is exclusive to ProBilt™ machines and is easy for any line operator to use.
One of the most common feedback points we hear from customers is that they like simplified operational equipment. Usually line operators are understaffed and overworked. Simplifying how they use our equipment is a big selling point and the AccScan™ Control Panel is a great example of that.
Universal Systems SE developed our AccuScan™ Control Panel to simplify the operation of our adhesive melter systems. The main control screen lists the operational settings for up to 4 hoses and guns and the main tank. You can filter through these sections by pressing the Zone button. Once you choose the zone you wish to set the temperature for, press and hold the Set button. Then, using the up arrow, the digital screen will show the temperature setting increase until you reach your desired temperature setting. Once the tank or hose zones are set to desired temperatures, release the Set button. We also offer a Set Back button on the main screen. The Set Back feature puts the machine in an idle state, heating only to 165 degrees.
For further step by step instructions, we have put a video on our Universal Systems SE YouTube channel. Please check it out at https://youtu.be/QhSCXZs-8wY.
For any further instructions or information about our AccuScan™ Control Panel please call (561) 272-5442 or email sales@ussefl.com.