When to Use Micro-Adjust Modules
Hot melt system modules are located on the front of your applicator guns. There are several different types of modules and in most cases, they can be easily replaced on the manifold versus replacing the entire gun assembly. Changing out a module is a more cost-effective way to increase productivity and lower glue costs. Typically, modules need to be replaced when they are having glue dripping issues or major leaking from the nozzle. This is caused by normal wear or char getting stuck in the piston chamber, not allowing it to seat securely.
When replacing a module, you have the option of buying a standard case sealer module or a micro-adjust module. This refers to the module’s adjustment cap on the module body. A standard case sealer module comes pre-set and typically needs no adjustment. This is our most popular style module. A micro-adjust module cap is typically sold on Zero Cavity or ProBead Reduced Cavity modules. These modules have a user-friendly adjustable screw top that changes the pressure of the glue through the nozzle. This allows the operator to dial in a precise glue bead. Typically, zero cavity and ProBead reduced cavity modules have micro-adjustable caps for this reason. For example, they are used on medication boxes or beauty supplies. Another advantage to a zero cavity or ProBead reduced cavity micro-adjust module is the self-cleaning functionality, limiting charring and clogging.
For more information about micro-adjust modules please reach out to a technical sales rep at sales@ussefl.com or call (561) 272-5442.
How to Effectively Clean Your Melter
Keeping your hot melt adhesive system clean may not be on the top of your priority list. However, take a look at your melter now, it is probably bronzed and blackened with old melted glue and char in the glue reservoir. That is what travels through your application system and onto your boxes. That is also what is potentially causing clogging issues and why you are replacing so many nozzles. Even though your melter looks like this now, it is possible to clean it and positively impact the longevity of your system. We recommend that you clean your system at least once every quarter. If you are running 24-hour shifts, 7 days a week, then you might want to schedule cleaning once a month.
Universal Systems SE sells a product called Purge Plus™ that, when used properly, will clean almost any melter. The directions for use are simple:
- Drain all hot melt from tank reservoir
- Fill reservoir with Purge Plus™
- Heat Purge Plus to 350°F – 375°F for approximately 45 minutes
- Open tank drain valve and remove tank filter assembly
- Slowly start pump and run Purge Plus™ through the tank manifold and into a meal container until reservoir is empty
- Stop pump, replace filter assembly and close drain valve
- Carefully wipe any remaining contaminants from tank reservoir
- Add new hot melt and recirculate through system
- Drain one cup from each hose
In addition to cleaning the tank reservoir and heated hot melt hoses, if you are running a ProBilt™ series melter, the exterior is manufactured out of 316 grade stainless steel. So, any stainless steel cleaner will shine the exterior of the tank.
For any additional questions about Purge Plus or how to properly clean your tank and hoses, please call a Universal Systems service technician at (561) 272-5442 or email tech@ussefl.com.
When to Replace a Module
One of the most commonly replaced items on any hot melt packaging line is the module. Typically confused with an applicator gun head, the module attaches to the front of the applicator gun and dispenses the glue through the nozzle and onto the applicable surface. If you are experiencing clogging issues with your hot melt line or dripping from the tip of the nozzle, most likely the module has reached it’s end of life and needs to be replaced.
Replacing a module is fairly simple. First make sure the air is disconnected from the applicator. Always wear Kevlar gloves and eye protection when replacing any parts on your active hot melt system. The parts get hot and extending downtime might not be an option, so operator safety is very important. Then, remove the front two screws from the module and pull the module off the surface of the gun manifold. Make sure that you use the new o-rings and screws that come in your new module replacement kit. This will ensure that the new seal is tight and will not leak once operations restart. Also, make sure you are replacing the existing module with the correct replacement module. Below is a list of module options:
- Standard H200 Module
- Reduced Cavity H200 Module
- ProBead Self-Cleaning Module
- Zero Cavity Standard H200 Module
- Zero Cavity Micro Adjust H200 Module
- Swirl Pattern Modules
- Weave Pattern Modules
- H20 Modules
Finally, we also recommend to put a new nozzle on every new module. This will ensure that no clogging will occur. If you have a zero cavity or ProBead module, then the nozzle will already be attached.
If you need any more information about modules for your packaging line, please email sales@ussefl.com or call (561) 272-5442.
How to Change Out a Melter Pump
There are several reasons why a melter’s pump might stop working. The most common reasons are clogging of the ball and seat from foreign matter such as carton dust, and the actuator clogging due to dirty or oily air. No matter what the reason, if your pump stops pumping it needs to be replaced. Obviously, it much more cost effective to change out a pump then to replace the entire unit. However, it is not always easy to switch out a pump, especially if you are new to the line. Below are a few tips to help ease you through the process.
- Make sure the circuit breaker on the front of the unit is set to OFF once the applicator has reached normal application temperature.
- Shut OFF the input air to the pump.
- Set the pump regulator to zero and trigger all guns to relieve system pressure.
- When removing the old pump, rotate it slightly to break the suction and then pull it straight up and out.
- When installing the new pump, make sure to torque the screws 15-16 ft-lbs.
- Connect the pump electrical plug to tank receptacle and turn tank back on.
- Once the tank board reads that the tank has reached set temperature, wait 15 minutes. This will allow the glue around the pump hydraulics to get to temperature.
- After waiting 15 minutes, reinstall the air regulator and connect the airline and activate air.
If you have any further technical questions and want to speak with a technical sales rep, please call (561) 272-5442 or email sales@ussefl.com.
Know Your Strengths
Knowing your strengths and the value add that you provide are important keys to success for any business. Universal Systems SE’s strength is the in-house manufacturing, QA process and customer service that we provide to our customers all year. The value add is the high-quality material and product that we put to market at a more affordable rate than most of our competitors.
Every day we have maintenance managers or co-packers calling in to find out if we can support their old Nordson® tank. The simple answer is yes. We can support old melters and usually fix any issues that your hot melt applicator may be having. On our website, we offer a search functionality that cross references thousands of product IDs from other manufacturers to make it easy to see which USSE parts are a perfect fit for your old system. However, not only do we support the old, but we manufacture new equipment that will function the same as your old and hopefully last longer. In order to help increase the life expectancy of your hot melt equipment, we offer a recommended maintenance schedule for any maintenance manager so that they can keep up with the life of their products and know when to replace important parts.
Another value add is the fact that we stock over 10,000 items at all times. Not only do we have hundreds of different styles and diameter nozzles in stock, we also stock pumps, control boards, filters, hoses, applicator guns, modules and we always stock tanks. Unlike most manufacturers, that make to order tanks, hoses and guns, we have one of the largest in stock inventory of any other hot melt manufacturer. And everything ships from the US, which means that you can typically get it within the week or overnight service if needed.
If you are ever in need of technical support for your old melter or hot melt equipment, do not hesitate to call us at (561) 272-5442. We are here to use our strengths, to help you add value.
The Importance of Product Support
Universal Systems SE has been manufacturing hot melt equipment since 1981. Starting with hoses and nozzles, then moving into applicators, pumps and tanks. Our first ProBilt tank was launched in 1990. Since then, our melter has only had a couple of generational upgrades. We believe that this is what sets us apart from other hot melt equipment manufacturers in the industry today. We have never believed upgrading our equipment or technology so much that it makes our old tanks in operation obsolete. We have added features and improved upon what we initially launched in 1990, but we have not let technology negatively impact the operational ease of our machines.
USSE believes in the importance of long-term product support and cross compatibility. There are hot melt system manufacturer’s in the industry, like Nordson®, who have discontinued not only production but also product support of their old melters. Both the 2300 series and 3000 series melters, while discontinued by Nordson®, are still in operation in hundreds of packaging facilities across America. Unlike Nordson®, Universal Systems still supports those old melters because we appreciate the fact that many of these melters, similar to the ProBilt melters, continue to run even 20+ years after initial operation. We are one of the only manufacturers in existence to still make and service 2300 & 3000 series pumps.
We also believe in product uniformity across all of our melters. That is why when we designed our melters, we made sure that all of Universal Systems’ ProBilt machines run the same control boards, pumps and tank filters. In most cases, facilities run several ProBilt melters, but only need to stock 1 or 2 of each spare part. That uniformity creates a streamlined and more simplistic inventory process.
As we move deeper into 2021 and our new normal continues to change, think about how the importance of long-term product support and a streamlined inventory process can help keep your packaging lines up and running. For more information about Universal Systems and our ProBilt line of melters please email sales@ussefl.com.
Packaging in the Pharmaceutical Industry
It’s been a wild ride over the last year, but the pandemic has brought on several advances in the pharmaceutical industry. Hot melt application in the pharmaceutical industry has always been important, but now more than ever. As the US pushes forward with millions of vaccines, each medication needs to be precisely packaged to make sure that it arrives safely to its destination.
Universal Systems manufactures ProBilt Zero Cavity Modules to apply a thin line of hot melt along medication boxes. Zero cavity modules have a very specific look, with a matched needle and nozzle assembly which eliminates minute material pockets that can cause nozzle clogging or dripping. They also come with an E-Z Micro Adjust option to that allows the operator to “dial in” on an exact adhesive extrusion and precise bead placement. This unique technology allows for line operators to place a small amount of glue on a small, predetermined location without creating any stringing. Typically, because of the precision requirements, most zero cavity modules are made with either a .008 or a .012 diameter orifice, so that there can never be too much glue applied.
Because zero cavities have a matched piston nozzle needle and seat, when they finally wear out, most manufacturers require customers to replace the entire module. Universal Systems does not. We manufacture a rebuild kit specifically for zero cavity modules for a fraction of the price of replacing an entire module. Check out our rebuild kits here: https://www.ussefl.com/products/hot-melt-modules/module-rebuild-kits/.
Not many hot melt application manufacturers offer zero-cavity modules. Luckily, here at Universal Systems we have been manufacturing this specific module for over 25 years. If you would like to learn more about zero cavity modules or get a price quote, please reach out to sales@ussefl.com or call (561) 272-5442.
Managing Your Packaging Line in the New Year
It’s finally here, 2021! It felt like 2020 took forever to end, but now that it is gone, we need to make 2021 the best and most efficient year yet. Due to the struggles that we all faced last year, company strategies have changed, not because we wanted them to but because they had to. And like most industries, the packaging industry has also seen a lot of changes. We are now allowed less people in the office and on the line. Since workers have to be 6 feet apart, we cannot operate as many packaging lines as we want or need to. That means that we are getting less budget to spend on materials, supplies and equipment. Now, operating managers are finding themselves being more particular about cost and efficiencies. That is where Universal Systems comes into the mix. Our ProBilt line of hot melt equipment is made in the USA and has some of the strongest warranties in the industry. We have been manufacturing since 1981 and know what it means to work hard and take pride in that hard work. As we move out of a pandemic and into a new world, we have a few suggestions to help manage our “new normal” in the packaging world.
Catalog Your Inventory – while this may seem like a tedious task, it is worth it in the long run. Once you know what you have and how much you are using of an item, you will be able to estimate your budget needed for the new year.
Research Your Vendor Options – change is hard, but sometimes the best options are ones you haven’t even known about. Take some time to price out vendors for your packaging needs. There may be options out there that you don’t even know about that can save you a lot of money and be just as efficient and high quality as what you have been buying.
Learn How to Troubleshoot & Maintain – Pre-COVID, when the economy was thriving and budgets were high, packaging facilities had maintenance managers, operations managers, line operators, buyers, etc. Now, you may find yourself doing a little bit of everything. At Universal Systems, we believe that knowledge is power. The more you know about the equipment you are running and how to maintain and fix the issues will save you from overspending in the future. We have technicians that have over 40 years of experience in hot melt, that are here to help you if needed. Just call (561) 272-5442.
When to Call Your Glue Manufacturer vs. Your Packaging Machinery Technician
With the reopening of many packaging facilities in full swing, here at Universal Systems SE, we are getting a lot of technical calls that pertain to glue and not the packaging machinery itself. Not a lot of technicians realize that some of the problems they are experiencing with their equipment are actually being caused by the glue. By the way, this has always been the case. Since knowledge is power, below are 2 issues that we get a lot of calls about that are glue related and not machine related.
#1 Glue Related Issue – Char
Many line operators and line technicians have experienced char in their hot melt application systems and most of them think that the char is caused by the machine. That is not actually accurate. The hot melt tank will heat the glue, but only to the temperature that is set by the operator. It is very important to understand how recommended temperature ranges effects viscosity which allows the glue to run at its optimal level. Most charring is due to overheating the glue. That char will travel through your application equipment and cause clogs which will require you to replace equipment or its components. However, that will not fix the long-term problem of charring. If the charring is not corrected, when you install the new equipment it will clog again. That is not a machinery issue, that is a glue issue. Our suggestion is to speak with your glue provider and find out all of the specifications on the glue you are using such as ball and ring, optimal temperature and viscosity. That will save you a lot of money in the long run and should reduce any excessive charring.
#2 Glue Related Issue – Coagulation
There is no doubt about it, glue is expensive. In most cases, the glue can be more expensive than the application equipment. The reason is because most facilities use a lot of it. As we all know, the world has been a crazy place this year, and with the re-opening of a lot of packaging plants, comes new, reduced operating budgets. We have heard from a lot of customers that in order to save on costs, they have had to change glue, whether it is moving to a more inexpensive glue, or a system that lays down less glue but with a stronger adhesion. Either way, if you change glue and do not meticulously clean your glue application system, you can have coagulation causing clogs. We recommend cleaning your tank and hoses with Purge Plus or a similar cleaning substance before changing glues.
At Universal Systems SE, we are always happy to help with any issues that you might have. But keep in mind that sometimes, your issue might be something that you need to discuss with your glue manufacturer. In the meantime, please feel free to reach out to us with any questions at tech@ussefl.com.
Safety in Switching Out Glue Equipment
The best way to keep your packaging line up and running as efficiently as possible is to do preventative maintenance. Here at Universal Systems SE, we have advocated for regular packaging line maintenance, including all of your glue melter equipment and components. However, it is not only important to know when to do maintenance, it is also important to know how to do that maintenance. There are more mistakes made in the switching out of glue equipment and components than you may think. Whether you are changing out a filter or switching a pump, there are steps to take in order to ensure a smooth transition, with the least amount of downtime. Here are a few tips on switching some of our ProBilt hot melt equipment products.
Tank Filters
First and foremost, it is important to know the model of your tank. Even though that sounds like standard knowledge, there are many tanks that look similar but have different tank capacities, pump types and filters. Once you know the tank model, you can look up if you need to replace the entire tank filter or if you can replace just the screen. On USSE’s ProBilt tanks, for example, you have the option to change only the tank screen. This allows you to save some money long term, while still maintaining your tank. It is recommended that you make the change while the tank is in setback and to wear Kevlar gloves so that you don’t burn yourself. The tank filter is located on the side of the tank. It can be removed with a flat head screw driver. Once the complete filter assembly is removed, there is a long screw that secures the screen to the assembly. Simply remove that screw, switch the screen, and replace the filter assembly. If you are changing out the tank screen, make sure that you do not damage the filter bung or o-rings when making the switch. Also, be careful, the glue inside the filter is HOT.
In-line Gun Filters
These are the easiest of filters on your glue line to change out. In most cases, the filters can be reordered in packs of 5. Locate where the filter is on the filter assembly body and use a wrench to loosen and remove. Kevlar gloves should be worn, as the outside of the filter will be hot and there will be glue on the filter you are removing. Simply put the new filter in place and tighten.
Modules
Usually modules are switched out because they are dripping or leaking. This is typically caused by either char or end of life of seat and piston. Switching out a module is fairly simple. Before taking off the old module and replacing with the new, make sure that the system is not running. Each replacement module comes with 2 o-rings and 2 screws. Place the o-rings on the back of the module and secure it on the gun applicator with the new screws.
If you are running an H200, zero cavity or reduced cavity module, there are rebuild kits available.
Pumps
Switching out a glue pump is the least common practice on a packaging line. However, this is also simpler than you would think. Most technicians think that in order to change out a pump, you need to turn the tank off and let the glue cool. That is not always the case. If you are running a ProBilt tank and have an experience technician, he can switch out the pump while the system is still on. First, make sure you are wearing Kevlar gloves because the system will be hot. Turn off the air running to the system, this will limit any injuries. Remove the 3 bolts holding in the pump, use needle-nose pliers and do this carefully. Put the old pump on a large piece of cardboard where the glue can drain, cool and harden. Carefully put the new pump in, secure it with the 3 bolts and turn back on the air.
For any other questions about tank maintenance, please contact one of Universal Systems’ experienced technicians at (561) 272-5442 or email tech@ussefl.com